Carbolite 3216CC Indicator User Manual download pdf (Page 5)

Quick Start Guide

MC23-GB – v1.00

3 User levels

3.1 Understanding User Levels

There are two user levels in the controller; Level 1(Operator) and Level 2 (Supervisor).

Level 1 (Operator) is for the day to day operation of the controller. These parameters are

not protected by a security code.

Level 2 (Supervisor) provides access to additional parameters. Access to these is protected

by a security code

To Enter Level 2

1. Press and hold the page key  for 3 seconds.

2. The display will show Leu 1 GOTO

3. Release the page Key

4. Press the Up or Down  to choose LEu 2 (level 2)

5. Press the Up  or Down  to enter the code (Level 2 Code = 9).

If the correct code is entered, PASS should momentarily be displayed and then revert to the

level 2 home display (See Section Error! Reference source not found.)

If an incorrect code is entered the display reverts back to Level 1 home display (See Section

Error! Reference source not found.)

When level 2 operations have been completed, the supervisor must return to Level 1 either

manually or by ‘power cycling’, there is no time out function.

To Return to Level 1

1. Press and hold the page Key 

2. Press Down  to select LEu 1

It is not necessary to enter a code when going from a higher level to a lower level

When level 1 is selected, the display reverts to the home display (See Section 2.1)

Table showing parameters accessible in level 1 and Level 2

Operator LEVEL 1

Supervisor LEVEL 2

Home display

Home Display

Alarms (if configured)

Comms (if configured)

Controller setup

TIP

If while navigating the controller a parameter has been passed or you need to access

parameters which would be at the end of a scroll list, press and hold Scroll  and use Up

 to return to a previous parameter.

1 2 3 4 5 6 7 8

No comments

Carbolite 3216CC Indicator User Manual Page 5